3D models

Here you will find some 3D cad models of our heaters.  If you'd like us to add your heater to this area, contact our Engineering department.

Internet Explorer is required to view these models.  An ActiveX control will load the first time you visit.  It takes a minute or two, please be patient.

P1082 Screw Plug Immersion heater

480V, xxKW, 3Ph,
This is a screw plug immersion heater for use in commercial boilers. xx" immersion length, 2-1/2" NPT with enclosure

P1182 Fan heat sink

For PTC heaters
This is a concept heat sink that would be mounted to a fan and hold a PTC heater.

P1409-1 Heating plate Concept

Heating plate Concept
This is a concept heating plate system. 50VDC, 98W, 600mm x 600mm.

P1409-2 Heating plate Concept

Heating plate Concept
This is a concept heating plate system. 50VDC, 54W, 250mm x 250mm

P1410 Air heater concept

Air heater concept
This is a concept Air heater. 240V, 4KW. 15" height

300529 6220-Z01

model 6220 120V, 1450W
This is a special 6220 heater with fuse and thermostat and both leads at one end.

300551H Flanged Immersion Heater

480V, 34KW, 3Ph
This is a flanged immersion heater for use in commercial boilers. 10-3/8" immersion length, 5-3/4" square flange with 8 bolt holes. Very common configuration in the medical industry and used by several of the largest OEM boiler manufacturers.